Kern-sohn KFA 6000V20L Bedienungsanleitung

KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-Mail: [email protected] Phone: +49-[0]7433- 9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-

10 KFA V20-IA-e-1312 6.3 Connecting a display screen Attention Put the connecting cable to the display unit in a manner that it is protected

KFA V20-IA-e-1312 11 7.1 Load/unload weighing beams The weighing beams are designed for an evenly spread load Avoid falling load,

12 KFA V20-IA-e-1312 8 Service, maintenance, disposal Before any maintenance, cleaning and repair work disconnect the appliance from the oper

KFA V20-IA-e-1312 13 8.5 Instant help In case of an error in the program process, briefly turn off the weighing system and disconnect from po

14 KFA V20-IA-e-1312 9 Service documentation This chapter is only intended for a balance specialist! The weighing beams are fitted with

KFA V20-IA-e-1312 15 9.2 Check and adjustment of the corner load Check of the corner load: Place a suitable aid such as a pallet on both w

16 KFA V20-IA-e-1312 10 Preload / Deadload settings Kern model Max. preload* (kg) * = additive preload Deadload** (kg) **= already ap

2 KFA V20-IA-e-1312 GB KERN KFA V20 Version 1.2 08/2013 Installation Instructions Weighing beams Contents 1 Technical data ...

KFA V20-IA-e-1312 3 1 Technical data Model Weighing range Max Read- ability d Preload additive Cable length display screen approx. Co

4 KFA V20-IA-e-1312 Dimensions: „L“-models length 2000 mm

KFA V20-IA-e-1312 5 2 Appliance overview Illustrative example weighing system KERN KFA V20 + KFB-TM  Mains lead display screen  Connect

6 KFA V20-IA-e-1312 3 Basic Information (General) 3.1 Documentation These installation instruction contain all data necessary for placing and

KFA V20-IA-e-1312 7 3.5 Monitoring of Test Resources In the framework of quality assurance the measuring-related properties of the w

8 KFA V20-IA-e-1312 6 Unpacking, Setup and Commissioning 6.1 Installation Site, Location of Use The weighing beams are designed in a way that

KFA V20-IA-e-1312 9 6.2 Unpacking and placing Unpacking: Remove weighing beams and accessories carefully from packaging, remove packag