Kern-sohn TB 200-0.1US-RED Bedienungsanleitung PDF herunterladen

Sauter GmbH

Ziegelei 1

D-72336 Balingen

E-Mail: [email protected]

Tel: +49-[0]7433- 9933-199

Fax: +49-[0]7433-9933-149

Internet: www. kern-sohn.com

Instruction Manual

TB-US, TB-US-red

TB_US-BA-e-1211 1

DIGITAL THICKNESS GAUGE

Models: TB 200-0.1 US

TB 200-0.1 US-red

Annotation: Model TB 200-0.1 US-red has no free

adjustable measurement range. Only the

pre-set materials can be measured.

Please only read the adequate sections.

Table of contents

1. Features

2. Specifications

3. Front panel description

4. Material selection

5. Calibration

6. Measuring procedure

7. Measuring by velocity setting

8. Battery replacement

9. Declaration of conformity

Annotation: It is strongly recommended to calibrate

the new instrument before the first use, as

described in paragraph 5. By doing this it

will be achieved a much better measure-

ment result right from the start.

1. Features

» Wide measuring range and high resolution

» Convenient to measure the thickness of many materials,

e.g. steel, cast iron, aluminium, red copper, brass, zinc,

quarz glass, Polyethylen, PVC, grey cast iron, nodular

cast iron.

» Automatic power-off to preserve batteries

2. Specifications

Display: 4 digits, 10mm LCD

Range: 1.5 to 200mm (in 45# steel)

Resolution: 0.1mm/ 0.001inch

Accuracy: ± (0.5%n+0.1)

Sound velocity: 500 to 9000m/s

Power supply: 4×1.5V AA (UM-3) battery

Operating conditions: Temperature: 0 to 50°C

Humidity: <80%

Size: 160×68×32mm (5.5×2.8×1.2inch)

Weight: about 208g (not including batteries)

Accessories:

Carrying case

Operation manual

Ultrasonic sensor

3. Front panel description

TB 200-0.1 US TB 200-0.1 US-red

3- 1 Sensor plug

3- 2 Display

3- 3 mm/ inch key

3- 4 Power- key

3- 5 Material selection key

3- 6 Plus- key

3- 7 Ultrasonic sensor

3- 8 Calibration key

3- 9 Minus- key

3-10 Battery compartment/ cover

3-11 Coupling indicator

3-12 Base plate

3-13 Velocity key (only TB 200-0.1 US)

4. Material selection

4.1 The instrument has to be switched on by the

Power- key 3-4.

4.2 The Material selection key 3-5 has to be pressed and

the display 3-2 will show the code `cdxx` or `xxxx`.

`cd` is the abbreviation for `code` and `xx` is a

number among 0.1 and 11 that stands for the material

to be measured as shown in the scale below.

. `xxxx` is a 4-digit number describing

the sound velocity of the material defined by the user.

The `cdxx` material relationship is as follows:

1 2 3

Instruction Manual 1
TB-US, TB-US-red 1

Inhaltsverzeichnis

Seite 1 - TB-US, TB-US-red

Sauter GmbH Ziegelei 1 D-72336 Balingen E-Mail: [email protected] Tel: +49-[0]7433- 9933-199 Fax: +49-[0]7433-9933-149 Internet: www. kern-sohn.com

Seite 2

Sauter GmbH Ziegelei 1 D-72336 Balingen E-Mail: [email protected] Tel: +49-[0]7433- 9933-199 Fax: +49-[0]7433-9933-149 Internet: www. kern-sohn.com

Seite 3

Sauter GmbH Ziegelei 1 D-72336 Balingen E-Mail: [email protected] Tel: +49-[0]7433- 9933-199 Fax: +49-[0]7433-9933-149 Internet: www. kern-sohn.com

Verwandte Modelle: TB 200-0.1US

Kommentare zu diesen Handbüchern

Keine Kommentare

Kern-sohn TB 200-0.1US-RED Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Messgeräte Kern-sohn TB 200-0.1US-RED herunter. KERN & SOHN TB 200-0.1US-RED User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: TB 200-0.1US

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messgeräte Kern-sohn TB 200-0.1US-RED