Kern-sohn ECE 50K20 Bedienungsanleitung Seite 1

KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-Mail: [email protected] Tel: +49-[0]7433- 9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-soh

ECE-BA-e-1120 10 6 Operation 6.1 Weighing • The balance is switched on by pressing the "ON/OFF" key. • The balance performs auto-dia

ECE-BA-e-1120 117 Maintenance, upkeep, disposal 7.1 Cleaning Please disconnect the device from the operating voltage before cleaning. Only use a

ECE-BA-e-1120 12 8 Troubleshooting The balance should be switched off for a short time following an interruption in the programme sequence and dis

ECE-BA-e-1120 2 GB KERN ECE Version 2.0 08/2011 Operating instruction Platform scale Tabel of contents: 1 Technical data...

ECE-BA-e-1120 31 Technical data KERN ECE10K5 ECE20K10 ECE50K20 Readout (d) 5 g 10 g 20 g Weighing range (max) 10 kg 20 kg 50 kg Taring rang

ECE-BA-e-1120 4 2 Fundamental information (general) 2.1 Intended use The balance you have acquired serves to determine the weighing value of the

2.4 Monitoring the test substances The metrology features of the balance and any possible available adjusting weight must be checked at regular inter

ECE-BA-e-1120 6 5 Unpacking, installation and commissioning 5.1 Place of installation, place of use The balance is constructed in such a way that

ECE-BA-e-1120 75.2.2 Package volume Serial fittings: KERN ECB • Balance • Operating manual • Power adaptor 5.3 Mains supply/ Battery operation 5

ECE-BA-e-1120 8 Rechargeable Battery Installation: 1. Remove battery cover 2. Slide spacer to left or right, lever down on corner, t

5.4 Initial start-up A warm-up time of 5 minutes stabilises the measured values after switching on. The accuracy of the balance depends on the loca